TECHNICAL SPECIFICATIONS - HYBRIDE SOLAR INVERTER
Rating 100VA to 850VA 1450VA 2500VA to 3500VA
Model No. Apollo – 850 Apollo-1450 Apollo-2500
INPUT
Mains Input voltage at Inverter Mode
100 V AC – 300 V AC
Mains Input voltage at UPS Mode
175 V AC – 265 V AC
Charging Current for Battery
Dual Charging Option (Solar & Mains)
Nominal Batt. Voltage 12V 24V 48V
Solar Panel Voltage Range (DC) 10.4-16VDC 20.8-32VDC 42VDC
Battery Low Shut down 10.2VDC 21.2VDC 42.3VDC
OUTPUT
Efficiency
90%
Output Voltage 230VAC, 50HZ
Frequency Regulation 50±0.5%
Output Wave Form Sine Wave
THD <5% (Linear Load)
Overload 110%
Short Circuit Protection H-UPS Shut Down
Overload Reset 4 Times before Shut Down
AUDIO / VISUAL INDICATIONS
MAINS ON LED 1 : CONTINUES ON
UPS ON LED 2 : CONTINUES ON
BATT. CHARGING / CHARGED LED 3 : BLINK / OFF
LOW BATTERY LED 4 : CONTINUES ON WITH BEEP
OVERLOAD LED 5 : CONTINUES ON WITH BEEP
SOLAR CHARGING LED 6 : CONTINUES ON
GENERAL
Operating Temp. Range 0 C to +40C
Storage Temp. Range 0 C to +55C
Relative Humidity 0-95% Non-Condensing
Indications Inverter On,UPS On,Charging,Low Batt.,Overload,Solar Charging

Subject to VA Rating technical specification of the appliances.
Specification may change due to constant R&D.